General Guide - Kyocera Mita FS-1800 User Manual

General Guide

4.1 General Guide
Symptom
The printer will not
print from the
computer.
Print quality is not good.
Paper is jammed.
Nothing lights on the
operator panel even
when power is turned
on and the fan makes
no noise.
The printer prints a
status page, but data
from the computer is
not being printed
normally.
Check Items
Check the READY
indicator.
Check the ATTENTION
indicator.
A maintenance message appears in the
message display.
Check that the power cord is properly
plugged into the power outlet.
Check that the power switch is really in the ON (
Check the interface cable.
Check program files and application
software.
If you still cannot correct a printer problem even after checking the above,
please contact your Kyocera Mita dealer.
Off Look through the items below and check
anything that seems appropriate.
Flashing An error has occurred. For details on error
warnings and remedies, see section
Indicators
Lit See the appropriate item below.
Flashing See section
Lit
See section
page 4-7
See section
page 4-3.
See section
page 4-12.
Turn off the printer's power, plug in the power
cord securely, and try turning on the printer's
power again.
) position.
❘
Connect both ends of the interface cable
securely. Try replacing the printer cable. For
details on the parallel interface for this
printer, see
Try printing another file or using another
print command. If the problem occurs only
with a specific file or application, check the
printer settings for that application.
4-2
Corrective Action
on page 4-6.
4.3.1 Indicators on page
4.3.2 Maintenance Messages
4.2 Print Quality Problems
4.4 Correcting a Paper Jam
Appendix C.
4.3.1
4-6
on
on
on