Form Feed - Kyocera Mita FS-1800 User Manual

Operating the Operator Panel

Form Feed

Time Out
MENU
?
ENTER
ENTER
MENU
Automatic Form Feed Timeout Setting
When the printer receives no data for a certain time, it time out and
releases the current interface: it prints whatever data it has in its buffer
and feeds out the page. You can adjust the time-out time as follows:
1
Press the MENU key.
2
Press the
or
Others
3
Press the > key.
4
Press the
or
The default setting is 30 seconds.
>Form Feed
Time Out 030sec.
5
Press the ENTER key, the message display shows a blinking cursor
( ).
>Form Feed Time.
Time Out 030sec.
6
Pressing the
figure where the cursor is blinking. The time must be set in the
range of 0 to 495 seconds, in 5-second increments. You can use the <
and > keys to move the cursor back and forth through the figures to
rapidly set a large number.
If you want to abandon the setting procedure, press the CANCEL
key.
7
Display the desired time and press the ENTER key.
8
Press the MENU key and the message display returns to Ready.
1-110
key and select Others >.
>
key to display >Form Feed Time.
key will increase or decrease the value of the
or