Paper Weight - Kyocera Mita FS-1800 User Manual

Operating the Operator Panel
>>Paper Weight
?
ENTER
ENTER
MENU
Setting the Paper Weight
You can set the paper thickness for the paper type to be customized.
1
Display the paper type to be customized (see page 1-102,
the Paper Type) and press the > key.
2
Press the
or
>>Paper Weight
Normal
3
Press the ENTER key. The message display shows a blinking
question mark (?).
>>Paper Weight
? Normal
4
Press the
or
For details of the default setting for each paper type, see section
Paper Type Setting
Normal
Heavy (Thick)
Light (Thin)
If you want to abandon the setting procedure, press the CANCEL
key.
5
When the desired paper thickness displayed, press the ENTER key.
6
Press the MENU key and the message display returns to Ready.
If the paper type is set to Custom and the option duplexer is installed
on the printer, duplex printing can be enabled and disabled. See
Setting the Duplex Path
1-104
key to display >>Paper Weight.
key to select the paper thickness as shown below.
on page 5-11.
on the next page.
Adjusting
5.4