Sleep Mode On - Kyocera Mita FS-1800 User Manual

Operating the Operator Panel
ENTER
MENU
MENU
?
?
6
Pressing the
figure where the cursor is blinking. The timer must be set in the
range of 5 to 120 minutes, in 5-minute increments. You can use the <
and > keys to move the cursor back and forth through the figures to
rapidly set a large number
If you want to abandon the setting procedure, press the CANCEL
key.
7
Display the desired time and press the ENTER key.
8
Press the MENU key and the message display returns to Ready.
Turning Off the Sleep Timer
You can turn off the sleep timer function by following the procedure given
below.
1
Press the MENU key.
2
Press the
or
Others
3
Press the > key.
4
Press the
or
>Sleep Timer
030 min.
5
Press the > key and display >>Sleep mode.
>>Sleep mode
On
1-112
key will increase or decrease the value of the
or
key and select Others >.
>
key to display >Sleep Timer >.
>