9- IP Installer Software
The IP Installer software provides a quick view of Wirepath™ IP Surveillance devices connected to local network. This software is
required for initial setup of any Wirepath™ IP Surveillance device.
Recommendation: Before starting any configuration or service of Wirepath™ IP devices, we recommend that the latest version of
the IP Installer is downloaded from www.SnapAV.com to ensure that all functionality is available.
VPN Important Note: The IP Installer is not able to locate IP Devices if VPN connections are active. Close all VPN
connections before running the IP Installer.
1. Install the IP Installer
A.
Copy the WPS IP Installer from the CD-ROM or download it from www.SnapAV.com to a PC.
Note: The WPS IP Installer is a native executable application and does not require installation on the PC. We
recommend that it be manually copied to a known location on your work/install computer/laptop for easy
access.
2. Open the WPS IP Installer.
Once open, the installer will scan the network for Wirepath™ IP Cameras, NVRs, and Cameras that are connected to the
network. If no devices appear, select Search Devices button to initiate a scan of the network.
9.1- IP Installer Operation
1
www.snapav.com Support: 866.838.5052
2
1. Connected Device List
2. Device Name and Network Settings
3. Search Devices
4. Submit
3
4
Displays a list of all connected Wirepath™ IP surveillance device
names, and IP address.
Used to configure the devices network settings. MAC address cannot
be changed.
See section
10-Initial Configuration
When selected, the IP Installer will scan the network for connected
devices that are powered on.
Select to submit changes made to the network and name settings for
the selected device.
WPS-750-BUL-IP Installation Manual
Pg. 17