Manage The Router Information Protocol Settings - NETGEAR D6220 User Manual

these settings if you need a specific IP subnet that one or more devices on the network use, or if competing
subnets use the same IP scheme.
To change the LAN IP address settings:
1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
5. In the IP Address field, enter the LAN IP address for the modem router.
6. In the IP Subnet Mask, enter the LAN subnet mask for the modem router.
7. Click the Apply button.
Your settings are saved.
If you changed the LAN IP address of the modem router, you are disconnected when the changes take
effect.
To reconnect, close your browser, relaunch it, and log in to the modem router at its new LAN IP address.

Manage the Router Information Protocol Settings

Router Information Protocol (RIP) lets the modem router exchange routing information with other routers.
By default, RIP is enabled in both directions (in and out) without a particular RIP version.
AC1200 WiFi VDSL/ADSL Modem Router Model D6220
Manage the WAN and LAN Network Settings
183