Removal Of The Top Cover - Barco DP2K-12C Installation Manual

How to remove the rear cover from the projector?
1. Release the two captive screws at the bottom corners of the rear cover, using a flat screw driver.
Image 10-9
Release rear cover
2. Remove the rear cover of the projector doing the following:
a) gently pull out the top corners of the rear cover,
b) then move the rear cover away from the projector.
A
A
Image 10-10
Remove rear cover

10.6 Removal of the top cover

W
ARNING
All side covers, front cover and back cover have to be removed before removing the top cover.
Necessary tools
Allen key 3 mm
How to remove the top cover of the projector?
1. After all side covers, front and back cover are removed, turn all 3 fixation screws.
R5905050 DP2K C-SERIES 10/07/2012
:
This procedure may only be performed by qualified technical service personnel.
10. Removal and installation of projector covers
B
71