Power Loop Through To The Projector Electronics - Barco DP2K-12C Installation Manual

3. Physical installation
Image 3-8
5. Reinstall the cover of the main AC compartment.
Image 3-9
6. Reinstall the rear cover and lamp cover of the projector.
3.4

Power loop through to the projector electronics

This procedure explains how to provide the projector electronics with power in case no UPS unit is used.
Note that the projector is by default configured for use without UPS. So, the short power link cable is already
installed.
INLET/OUTLET fixation accessories
The plugs of the power cable which are inserted in the power INLET or OUTLET socket of the projector have to be secured. The
projector is equipped with fixation accessories as illustrated below.
18
A
A
B
R5905050 DP2K C-SERIES 10/07/2012