Removal Of The Xenon Lamp - Barco DP2K-12C Installation Manual
Dp2k c-series
Hide thumbs
Also See for DP2K-12C:
- Service manual (359 pages) ,
- Preliminary (2 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
4. Lamp & Lamp House
Image 4-4
Release lamp house
4. Take the lamp house by the handles and pull it out of the projector.
Caution:
Be aware of the weight of the lamp assembly. Take the necessary precautions to avoid personal injury.
Image 4-5
Remove lamp house
5. Place the lamp house on a stable support.
While starting up the projector, the electronics detect if a lamp is installed. If no lamp is installed, it is not
possible to start up the projector.
4.3
Removal of the xenon lamp
W
ARNING
XENON LAMP HANDLING OR SERVICE. ONLY TRAINED AND QUALIFIED TECHNICAL SERVICE PERSONNEL
ARE ALLOWED TO HANDLE THE XENON LAMP.
W
ARNING
24
:
DO NOT PERMIT UNAUTHORIZED PERSONNEL TO PERFORM OR ATTEMPT ANY PHASE OF
:
This procedure may only be performed by qualified technical service personnel.
R5905050 DP2K C-SERIES 10/07/2012
Advertisement
Table of Contents
