Realignment Of The Lamp In Its Reflector - Barco DP2K-12C Installation Manual

The software will validate the selected article number (7).
5. Fill out the serial number of the lamp (8).
6. Click Reset (9).
Image 4-26
Reset lamp info
C
AUTION
Communicator Touch Panel.
4.7 Realignment of the lamp in its reflector
Each xenon lamp installation requires a realignment of the lamp in its reflector for optimal performance of the
xenon lamp. Furthermore, it is recommended to realign the lamp after the first run time of 100 and 200 hours.
Especially the Z-axis of the lamp.
W
ARNING
How to realign the lamp in its reflector?
1. Remove the cover of the lamp compartment to gain access to the X-, Y-, and Z-axis adjustment thumbscrews of the lamp.
2. Switch on the projector and start up the lamp.
3. Go via the Communicator touch panel to the menu "Installation" > "Lamp" > "Light output".
R5905050 DP2K C-SERIES 10/07/2012
:
For more information about using the Communicator Touch Panel consult the user's guide of the
:
This procedure may only be performed by qualified technical service personnel.
4. Lamp & Lamp House
35