Removal Of The Side Cover; Removal Of The Rear Cover - Barco DP2K-12C Installation Manual

10. Removal and installation of projector covers
Image 10-6
Remove front cover

10.4 Removal of the side cover

Necessary tools
Flat screw driver.
How to remove the side cover of the projector?
1. Release the captive screw at the middle bottom of the side cover, using a flat screw driver.
Image 10-7
2. Remove the side cover from the projector doing the following:
a) gently pull out the bottom corners (A) of the side cover,
b) then gently pull out the top corners (B) of the side cover,
c) then move the side cover away from the projector (C).
B
A
Image 10-8

10.5 Removal of the rear cover

W
ARNING
Necessary tools
Flat screwdriver.
70
A
B
B
A
:
This procedure may only be performed by qualified technical service personnel.
C
R5905050 DP2K C-SERIES 10/07/2012
C