Source Input Ports Of The Dp2K C-Series Projector - Barco DP2K-12C Installation Manual

6. Input & communication
Can be used to connect external 3D devices to the projector. All signals necessary for 3D projection can be provided via this con-
nector.
PERIPHERAL PORT
For future use.
6.4

Source input ports of the DP2K C-series projector

Location of the source input ports
POWER
10 / 100 / 1000 BASE-T
1
2
Image 6-4
Inputs
1 DVI-D input, port A, Single link + HDCP
2 DVI-D input, port B, Single link + HDCP
3 (only for 2K projectors) SMPTE 292/424 input, port A (maximum cable length of 30 m allowed)
4
(only for 2K projectors) SMPTE 292/424 input, port B (maximum cable length of 30 m allowed)
SMPTE
Society of Motion Picture and Television Engineers - A global organization, based in the United States, that sets stan-
dards for baseband visual communications. This includes film as well as video standards.
DVI
Digital Visual Interface is a display interface developed in response to the proliferation of digital flat panel displays.
The digital video connectivity standard that was developed by DDWG (Digital Display Work Group). This connection
standard offers two different connectors: one with 24 pins that handles digital video signals only, and one with 29 pins
that handles both digital and analog video. This standard uses TMDS (Transition Minimized Differential Signal) from
Silicon Image and DDC (Display Data Channel) from VESA (Video Electronics Standards Association).
DVI can be single or dual link.
DVI Input formats
Input Source
standard
Single DVI VESA (640x480) 60
50
SW OS FMT
ICP
STAT STAT
STAT
DVI INPUT
DVI A
SEL
3
SYNC OK
1
Vertical rate
USB
OUT
ICP ALT
STAT CINEMA CONT
RS232 IN 3D INTERFACE
GENERAL PURPOSE IN/OUT
DVI B
SEL
SYNC OK
2
Scan type Color space
Progressive RGB
USB
IN
SMPTE 292/424 IN
A B
SEL SEL
SYNC OK
SYNC OK
PERIPHERAL PORT
3 4
Sampling Color depth
4:4:4 8 bit
R5905050 DP2K C-SERIES 10/07/2012