Necessary tools
3 mm Allen wrench.
How to open the sealed compartment of the Light Processor Unit?
1. Release the three hexagon head cap screws as illustrated. Use for that a 3 mm Allen wrench.
Note: A washer is mounted between the plate and the screw head.
Image 10-13
2. Lift up the cover plate slightly, using the two lower lips provided, and then remove the cover plate away from the projector.
Image 10-14
10.8 Close the sealed compartment
Necessary tools
3 mm Allen wrench.
How to close the sealed compartment of the Light Processor Unit?
1. Place the cover plate in its place as illustrated.
Caution:
Do not damage the micro switch at the top of the projector.
Image 10-15
2. Fasten the three hexagon head cap screws as illustrated. Use for that a 3 mm Allen wrench.
Note: Insert a washer between the each screw and the plate.
R5905050 DP2K C-SERIES 10/07/2012
10. Removal and installation of projector covers
73