The Trusted Certificates Screen - ZyXEL Communications UAG5100 User Manual
Unified access gateway
Hide thumbs
Also See for UAG5100:
- User manual (617 pages) ,
- Firmware release notes (29 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 178 Configuration > Object > Certificate > My Certificates > Import
LABEL
File Path
Browse
Password
OK
Cancel
39.3 The Trusted Certificates Screen
Click Configuration > Object > Certificate > Trusted Certificates to open the Trusted
Certificates screen. This screen displays a summary list of certificates that you have set the UAG
to accept as trusted. The UAG also accepts any valid certificate signed by a certificate on this list as
being trustworthy; thus you do not need to import any certificate that is signed by one of these
certificates.
Figure 255 Configuration > Object > Certificate > Trusted Certificates
The following table describes the labels in this screen.
Table 179 Configuration > Object > Certificate > Trusted Certificates
LABEL
PKI Storage
Space in Use
Edit
Remove
Chapter 39 Certificates
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse to find it.
You cannot import a certificate with the same name as a certificate that is already in the UAG.
Click Browse to find the certificate file you want to upload.
This field only applies when you import a binary PKCS#12 format file. Type the file's password
that was created when the PKCS #12 file was exported.
Click OK to save the certificate on the UAG.
Click Cancel to quit and return to the My Certificates screen.
DESCRIPTION
This bar displays the percentage of the UAG's PKI storage space that is currently in use.
When the storage space is almost full, you should consider deleting expired or
unnecessary certificates before adding more certificates.
Double-click an entry or select it and click Edit to open a screen with an in-depth list of
information about the certificate.
The UAG keeps all of your certificates unless you specifically delete them. Uploading a
new firmware or default configuration file does not delete your certificates. To remove an
entry, select it and click Remove. The UAG confirms you want to remove it before doing
so. Subsequent certificates move up by one when you take this action.
UAG5100 User's Guide
385
Advertisement
Table of Contents
Troubleshooting
