The Mobile Profile Screen - ZyXEL Communications SBG5500 Series User Manual

Figure 174 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click OK to go back to the Firmware
Upgrade screen.
Figure 175 Error Message

21.3 The Mobile Profile Screen

Use this screen to update the mobile profile on the SBG. The mobile profile is a WWAN package that
contains configuration to identify and activate the supported 3G/4G USB dongles.
Note: To update the supported 3G/4G USB dongle list, download the latest mobile profile
from the ZyXEL website and upload it to the SBG.
Click Maintenance > Firmware Upgrade > Mobile Profile to open the following screen. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
Do NOT turn off the SBG while profile upload is in progress!
Figure 176 Maintenance > Firmware Upgrade > Mobile Profile
The following table describes the labels in this screen.
Table 116 Maintenance > Firmware Upgrade > Mobile Profile
LABEL
Mobile Profile Status
#
Chapter 21 Firmware Upgrade
DESCRIPTION
This is a sequential value, and it is not associated with the entry.
SBG5500/3310 Series User's Guide
249