THOMSON ViBE VS7000 User Manual page 73

ViBE VS7000
User Manual
Chapter 3 'Web Browser Interface' — Interface Description
Figure 3-46. Hot folder configuration
The table shows the list of hot folders. Click one of them to access its
parameters:
File network storage (mounting
storage the hot folder should be created.
File folder: enter the name of the folder on the network storage where
the hot folder should be created.
File name filter: if you want to process only part of the files that are
placed in the hot folder, enter filter rules. For instance, if you want to
process any file with a trp extension, enter: *.trp.
Delete source file after
file once the workflow have been applied on it.
Workflow: select from the list the workflow that must be applied to the
files present in the hot folder.
In the frame below the list of workflows, you can see the public
parameters of the workflow. You can change the values at your
convenience.
For workflow that use a file input, the network storage, file folder and
file name parameters are automatically linked to the parameters set
above for the hot folder. If you want to use different parameters, select
the workflow parameter from the list and click the
remove the link.
You can also specify the following parameters for the job:
Name: name of the job.
Priority (available for file workflows only): if there are not
enough resources (CPU, memory...) to process all the jobs, and
if you want this particular job to be processed before the others,
set an important priority (between 1 and 250; 250 being the
highest priority). The other jobs will be processed more slowly.
point): indicate in which network
treatment: check the box to delete the source
button to
73