THOMSON ViBE VS7000 User Manual page 66

Chapter 3 'Web Browser Interface' — Basic Settings
66
2. Choose the type of input: TS over IP or TS file.
3. Depending on the type of input, set the following parameters:
For a TS over IP input:
Figure 3-37. Creating a new snapshot view for a TS over IP input
a. If your input is multicast, check the corresponding box and set
the LAN.
b. Enter the IP address and UDP port of the source.
c. Indicate a maximum TS bitrate, in bits per second.
For a TS file input:
Figure 3-38. Creating a new snapshot view for a TS file input
ViBE VS7000
User Manual