THOMSON ViBE VS7000 User Manual page 132

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
132
TS Audio Video Packetizer Item
The TS Audio Video Packetizer
elementary stream into MPEG-2 transport packets. These packets can
then be sent to a TS multiplexer.
Figure 3-106. TS audio video packetizer parameters
For this item, you must set the following parameters:
AAC encapsulation
whether the AAC audio should be encapsulated with an ADTS or an
LOAS header. LOAS is mandatory for ISDB-Tb, otherwise ADTS is a
good choice.
PCR generation: choose from the list if the PCR generation mode
should be:
Auto: a PCR is added in a video PID but not in an audio PID.
Choose this mode for TV programs.
Add on component: allows to add a PCR in an audio PID. Choose
this mode for radio programs.
Create independent PCR PID: an independent PID for the PCR is
created. Choose this mode for ISDB-Tb programs. In this case,
you must indicate the PID value in the
Input tab, in the
Output' on page 133.
None: no PCR is added.
Optimize video encapsulation: if set to true, less bandwidth is used.
However, some receivers do not support this feature.
Audio encapsulation
PES should be variable or fixed. If it is variable, less bandwidth is
used. However, some receivers do not support this feature.
If the number of frames per PES is fixed, set the
frames per
If the number of frames per PES is variable, set the
interval between PES
item encapsulates an audio or video
(useful only for an AAC component): choose
PCR PID field. See
mode: choose whether the number of frames per
PES.
in milliseconds.
TS multiplexer item, in the
Section 'TS Multiplexer
Number of
Maximum
ViBE VS7000
User Manual