THOMSON ViBE VS7000 User Manual page 138

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
138
Figure 3-110. HLS file output parameters
For this item, you must set the following parameters:
HLS files network storage (mounting
storage where the output files must be placed.
HLS files folder: indicate the path to the folder on the network storage
where the output file must be placed.
Manifest file name: name of the main manifest.
HLS Protocol version: choose one version:
Version 2: suitable for programs with only one audio language.
The generated chunks contain both video and audio
components.
Version 4: mandatory for programs with more than one audio
language. Video and audio components are not in the same
chunks (only one component per chunk). This version may be
not supported by old devices.
Add low bitrate audio only
only the audio component are generated.
Encrypt files: if set to true, DRM is activated. Set the following
parameters:
Key mode:
- if set to Fixed Key, the key is fixed once. Enter the value of
the key in the
point): indicate the network
stream: if set to true, chunks that contain
Key field (32 characters).
ViBE VS7000
User Manual