Input/Output - THOMSON ViBE VS7000 User Manual

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters

Input/Output

106
Double-click the elements of the condition to set them:
Select a parameter from the available parameters. Only the
public parameters with labels are proposed, as well as the
parameters specially created to be used in the condition.
Choose the operator: equal to, different than, lower than or
superior to.
Enter a value in the field.
You can use the OR, AND and NOT operators on the right to build a
more complex condition.
Summary: check the box if you want the parameter to appear in the
summary of the workflow.
Whether the Input and Output categories are available depends on the
nature of the item.
When such a category is available, it lets you publish the input or output
and specify a label, as well as setting some specific parameters.
Publishing Inputs and Outputs
Publishing the input or output is useful if the workflow you create is not
a full, instantiable workflow, but is an intermediate workflow (i.e. a series
of modules) that will later be used in other workflows. In this case, you
may for example publish the input of the first module and the output of
the last module.
To publish an input or output, check the
If you want, type a Label
Figure 3-74. Publishing an output
Specific Input and Output Parameters
For some items, a table is also available and lets you define parameters
for this specific input or output.
For example, in the
type should be a program or a component.
in the field.
TS multiplexer output item, you can set if the input
Publish box.
ViBE VS7000
User Manual