THOMSON ViBE VS7000 User Manual page 112

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
112
Source L/R: select the audio component to be extracted from the
SDI signal.
An SDI signal can contain several audio channels which can be
dissociated (dual mono mode) or associated (stereo mode). Two
mono audios or one stereo audio form an AES/EBU mux.
AES/EBU mux are grouped into pairs, each one forming a group.
An AES/EBU mux is referenced by the group number and the
number of the AES/EBU mux in the group. The term channel in
the audio source
number.
Default display aspect
Display aspect ratio
Auto (WSS), Auto (AFD), Manual.
Display aspect ratio when WSS and AFD are
AFD are absent, define if the VS7000 should Keep last WSS/AFD or
Use default display aspect ratio.
Raise a log when WSS and AFD are
see a log for this absence.
For more information on SDI inputs, see also
page 210.
TS Audio Video Extractor Item
The TS Audio Video Extractor
stream from a transport stream. The output stream may for instance be
forwarded to a decoder.
Figure 3-82. TS audio video extractor parameters
The parameters you set here act as filters for the component extraction,
that is, the VS7000 will extract the first component it finds that matches
the parameters you defined.
For this item, you must set the following parameters:
parameter in fact refers to the channel pair
ratio: 16/9 or 4/3.
mode: Auto (WSS or AFD when WSS is absent),
absent: set to true if you want to
item lets you extract an audio or a video
absent: in case WSS and
Section 'SDI Inputs'
ViBE VS7000
User Manual
on