THOMSON ViBE VS7000 User Manual page 111

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
ViBE VS7000
User Manual
Monitoring view: set to True if you want to create a snapshot view for
this input. In this case, indicate the
respects (DVB, MPEG-2 or ATSC). For more information on snapshot
views, refer to Section 'Creating a Snapshot View'
TS file network storage (mounting
the TS file to import in input is stored.
TS file folder: folder on the network storage where the TS file to import
in input is stored.
TS file name: name of and relative path to the TS file to import in
input.
Iterations: number of consecutive times the file will be played.
Loops are not seamless: there are continuity counter errors, and
audio/video disruption.
The TS bitrate is automatically computed from the file PCRs.
SDI Input
Figure 3-81. SDI input parameters
For this item, you must set the following parameters:
SDI input: number of the physical SDI input to use. The names set in
the SDI category of the
Maximum video
Number of audio
components that the SDI input contains. For each component, set the
following parameters:
Mode: stereo, mono left or mono right.
Standard
point): location on the server where
System tab are available in the list.
format: PAL, NTSC, or a variety of HD resolutions.
components: enter the number of audio
that the TS file to import
on page 65.
111