THOMSON ViBE VS7000 User Manual page 126

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
126
Figure 3-102. MPEG-1 layer 2 encoder parameters
For this item, you must set the following parameters:
Bitrate: enter the bit rate value (without encapsulation overhead), in
bits per second.
Stereo mode: choose the stereo mode to use from the drop-down list.
Available modes are:
Joint stereo: removes stereo intensity irrelevance
Stereo
Dual channel: uncorrelated (contains two completely different
audio streams but encodes them together).
This parameter is ignored when the input is mono.
H.264 AVC Encoder
The H.264 AVC encoder
8 bits, from low resolution up to HD.
When the input video is chunked, an IDR frame is set at the beginning
of the chunk. This overrides the configuration parameters.
Figure 3-103. H.264 AVC encoder parameters
item is able to encode H.264 AVC video in 4:2:0,
ViBE VS7000
User Manual