THOMSON ViBE VS7000 User Manual page 141

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
ViBE VS7000
User Manual
Push on remote Web
posted to a remote Web server, an IIS server for example. In this case,
set the following parameters:
Remote Web server
with the remote Web server. If the remote Web server URL
contains a name instead of an IP address, you must configure
the DNS in the
on page 71).
If you do not wish to use the IP address resolution by DNS, you
can also directly enter the IP address of the remote Web server
in the Remote Web server IP address
Authentication
requires an authentication, and enter the
Password.
Encrypt files: if set to true, DRM is activated. Set the following
parameters:
Algorithm: two algorithms are available:
- AES CBC
- AES CTR
Key server connection: select from the drop-down list the
conditional access server to which ViBE VS7000 should connect
to get the key. If set to None, ViBE VS7000 generates the key
itself. Otherwise, enter the specific parameters of the CAS
server:
- Key server
- Use authentication
requires an authentication, and enter the
Password. Also specify the HTTP
type (auto, basic or digest).
- Key server user name
to access the Irdeto key server.
- Key server password
to access the Irdeto key server.
- Server key,
the values provided by BuyDrm.
- Account Id
the Irdeto server.
- Content id: identifier of the program to encrypt (string).
server: if set to true, the manifest and chunks are
URL: indicate the LAN used to communicate
System tab, in the IP
type: set to true if the remote Web server
URL: URL of the CAS server.
(BuyDrm): set to true if the CAS server
(Irdeto): enter the user name required
(Irdeto): enter the password required
User key, Key Id and
(Irdeto): identifier of the account to connect to
category (see Section 'DNS'
field.
User name
User name
Key server authentication
Media Id (BuyDrm): enter
and
and
141