THOMSON ViBE VS7000 User Manual page 129

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
ViBE VS7000
User Manual
Dolby surround
as material encoded in Surround EXTM. This parameter is only
used if the encoded audio has two Surround channels.
A/D converter
particular A/D conversion stage to be marked as such, so that a
decoder may apply the complementary D/A process. Choice
between: Standard or HDCD.
Mixing level: acoustic pressure of the sound during the final
mixing, in decibels.
Bitrate for Mono: choose from the list the bitrate to use for mono
audio.
Bitrate for Stereo: choose from the list the bitrate to use for stereo
audio.
Bitrate for 5.1: choose from the list the bitrate to use for 5.1 audio.
Bitstream mode: choose from the list the type of audio service:
Complete main: main audio service
Music and effect: main audio service
Visually impaired: associated service
Hearing impaired: associated service
Dialogue: associated service
Commentary: associated service
Emergency: associated service
Voiceover: associated service
Karaoke: associated service
Line mode DRC: information used by Dolby® Digital audio decoders
with line-level outputs, to adjust their output dynamic according to a
profile. Choose from the list the line mode to use for Dynamic Range
Control.
RF mode DRC: information used by Dolby® Digital audio decoders
with an RF-remodulated output, to adjust their output dynamic
according to a profile. Choose the profile from the list.
Preferred stereo downmix mode (multi-channel
the list if you would rather use Lt/Rt or Lo/Ro downmix in a decoder
with stereo outputs:
Lt/Rt preferred: Left total/Right total. The Lt/Rt downmix totals
the Surround channels and adds them in-phase to the Left
channel and out-of-phase to the Right channel. This enables a
Dolby Surround Pro Logic decoder to rebuild the L/C/R/S
channels for a Pro Logic home theater.
EX: set to enable to identify the encoded audio
type: enables audio that has passed through a
only): choose from
129