THOMSON ViBE VS7000 User Manual page 136

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
136
Push stream on remote web
to a remote Web server. In this case, set the following parameters:
Remote web server
with the remote Web server. If the remote Web server URL
contains a name instead of an IP address, you must configure
the DNS in the
on page 71).
If you do not wish to use the IP address resolution by DNS, you
can also directly enter the IP address of the remote Web server
in the Remote web server IP address
Local storage duration when remote server is
enter the time during which the content should be bufferized if
during a push action, the remote server becomes unreachable.
When the remote server is available again, all the content is sent
at once.
Before using this feature, check that the bandwidth is widely
dimensioned, because otherwise there is a risk of network
congestion when the remote server is back up, which can impact
other streams.
Delete files from remote web
posted on the remote Web server are deleted after the
stream duration
Remote web server
requires an authentication select its HTTP type, Basic or Digest,
and enter the
Define backup remote Web
also sent to a backup remote Web server for redundancy
purposes. Indicate the URL and the IP address of the backup
server in the dedicated fields, as well as the authentication
parameters, if needed.
Encrypt files: if set to true, DRM is activated. Set the following
parameters:
Key server connection: select from the drop-down list the
conditional access server to which ViBE VS7000 should connect
to get the key. If set to None, ViBE VS7000 generates the key
itself. Otherwise, enter the specific parameters of the CAS
server:
- Content id
(string).
- Resource id
encrypt (integer).
- Account Id
the Irdeto server.
server: if set to true, the stream is pushed
URL: indicate the LAN used to communicate
System tab, in the IP
server: if set to true, the files
set above.
authentication: if the remote Web server
User name and Password.
server: if set to true, the stream is
(Nagra): identifier of the program to encrypt
(Verimatrix): identifier of the program to
(Irdeto): identifier of the account to connect to
category (see Section 'DNS'
field.
unreachable:
Available
ViBE VS7000
User Manual