THOMSON ViBE VS7000 User Manual page 135

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
ViBE VS7000
User Manual
Figure 3-109. HLS output parameters
For this item, you must set the following parameters:
Manifest file name: name of the main manifest.
Add prefix: set to true to use the name of the manifest as a prefix for
all file names (chunks and secondary manifests). This is useful to
differentiate the files originating from several streams.
HLS Protocol version: choose one version:
Version 2: suitable for programs with only one audio language.
The generated chunks contain both video and audio
components.
Version 4: mandatory for programs with more than one audio
language. Video and audio components are not in the same
chunks (only one component per chunk). This version may be
not supported by old devices.
Available stream
Web server.
Add low bitrate audio only
only the audio component are generated.
Stream available on local web
available on the VS7000 internal Web server. In this case, set the
following parameters:
Local Web server IP
receive the chunks from this address. This address must be part
of a ViBE VS7000 LAN, otherwise the job creation will be
refused.
Folder: folder where the manifests and chunks are stored on the
local Web server.
Max clients
this output stream. This parameter is used to check that the
device has the resources to process the requests for this stream.
duration: depth of chunks that are available on the
stream: if set to true, chunks that contain
server: if set to true, the stream is
address: virtual IP address. A player can
number: expected maximum number of clients for
135