THOMSON ViBE VS7000 User Manual page 63

ViBE VS7000
User Manual
Chapter 3 'Web Browser Interface' — Basic Settings
2. Choose the SDI category.
3. In the top-right corner of the view, click Edit.
4. In the top-right corner of the view, click
Figure 3-33. Adding a new SDI matrix
5. Set the SDI matrix' parameters:
Number of
Name: enter a name for the matrix, at your convenience.
IP address to connect to the SDI matrix remote equipment.
6. Click OK.
Once you have declared a matrix, the GUI displays a representation of
the matrix.
inputs/outputs: size of the matrix.
Add matrix.
63