THOMSON ViBE VS7000 User Manual page 254

Appendix F 'Network Settings (6RU and 10RU Devices)' — Flex10
254
Flex10: only one network (System_private_LAN), connected to
both FlexNIC of interface 1.
Uplink: x1 on the two Flex10. Once the setup is complete, it is
possible to undo the configuration of the output on interface x1
of the Flex10.
Internal data network:
Network: 192.168.2.0/24
LAN Id: 2
First address: 192.168.2.1
No gateway
No supervision address
Flex10: only one network (Internal_data), connected to both
FlexNIC of interface 2
No uplink
Control (X6) network:
Network: 10.12.55.0/24
LAN Id: 3, VLAN tagging (on 10-RU devices only)
Gateway: 10.12.55.1
Supervision
10.12.55.100.134 or 10.12.55.100.151
First address: 10.12.55.101, 10.12.55.100.118, 10.12.55.100.135 or
10.12.55.100.152
Flex10: one network for each Flex10 (Control-A and Control-B),
connected to a FlexNIC of interface 3, on private network and
smart link. Control-A, Control-B and data networks are set as
private networks and smart link.
Uplink: x6 on the two Flex10.
Data 1 (X2) network:
Network: 192.168.201.0/24
LAN Id: 4, VLAN tagging (on 10-RU devices only)
No gateway
No supervision address
First address: 192.168.201.1, 192.168.201.17, 192.168.201.34 or
192.168.201.51
Flex10: one network for each Flex10 (Data_1-A and Data_1-B),
connected to a FlexNIC of interface 2 on 10-RU devices or
interface 4 on 6-RU devices, on private network and smart link.
Uplink: x2 on the two Flex10.
Data 2 (X3) network:
address: 10.12.55.100, 10.12.55.100.117,
ViBE VS7000
User Manual