THOMSON ViBE VS7000 User Manual page 116

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
-80
116
Figure 3-86. Audio loudness control parameters
For this item, you must set the following parameters:
Mode: choose from the list the mode to apply: Automatic loudness
control, Static loudness control or Peak limiter.
If the mode is set to Automatic loudness control, set the following
parameters:
Noise level: level of noise under which the audio level is not modified,
in decibels relative to full scale.
Target level: audio level towards which the output level is modified if
the Signal ratio value is higher than 1. In decibels relative to full scale.
Figure 3-87. Audio loudness control – Target level
Noise level
Max Gain
-70 -60 -50
Audio volume in input (dB)
Caption
Audio level if no processing is applied
Audio level with processings applied
Target
Gain Increase Gain Decrease
-40 -30 -20 -10
30
20
10
0
-10
-20
-30
-40
-50
-60
-70
-80
0 10 20 30
ViBE VS7000
User Manual
Audio
volume
in
output
(dB)