THOMSON ViBE VS7000 User Manual page 59

ViBE VS7000
User Manual
Chapter 3 'Web Browser Interface' — Basic Settings
Prerequisite: before creating the workflow, make sure you have created
the network storage(s) that will be used to read the input files and write
the output files in the
To create this workflow:
1. Proceed as described in section
page 55 and add all the items listed above.
2. Perform the settings described in the table below.
Table 3-3. Settings to perform to encode a file
Item
TS file input TS file network
storage
TS file folder
TS file name
TS Maximum format
audio/video
Program number
extractor
PMT PID
Component PID
Codec
H.264 AVC Bitrate
encoder
Profile
Frame structure
TS component Component PID
extractor
TS multiplexer TS bitrate
TS multiplexer Component PID
(input 1)
PMT PID
TS multiplexer Component PID
(input 2)
TS file output TS file network
storage
TS file folder
TS file name
System tab, in the
Section 'Creating a Workflow'
Parameter
Set the default value and set to public
Set the default value and set to public
Set to public, label = "Input TS
filename"
Set to HD 1080i50
Label = "Input PN"
Label = "Input PMT PID"
Label = "Input video PID"
Set to Any
Set to public, label = "Output video
bitrate"
Set to High
Set to Interlace, public
Label = "Input audio PID"
Set to 2,500,000 bps, public, label =
"Output TS bitrate"
Make a link to "Input video PID"
Make a link to "Input PMT PID"
Make a link to "Input audio PID"
Set the value
Set the value
Make a link to "Input TS filename"
Network Storage category.
Action
on
a
a
a
a
59