THOMSON ViBE VS7000 User Manual page 147

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
ViBE VS7000
User Manual
To use the Choice tool, you first need to have in your workflow a public
parameter with a label. For our example, publish and give a label to the
bitrate parameter in the input item.
Insert the Choice item in your configuration and link it to the preceding
item.
Figure 3-117. Inserting the Choice item in a workflow
Use the condition editor to perform your configuration. For our example,
set the condition of the
Figure 3-118. Example of condition configuration for a Choice item
Selector
The Selector tool lets you define a condition to choose the input that
should be used. It works basically the same way as the
reversely.
Let us take an example: a configuration contains two inputs: one TS over
IP input and one TS file input. We want the job author to choose whether
to use one input or the other. We thus use the
Figure 3-119.
Figure 3-119. Example of use of the Selector tool
Choice item as shown below.
Choice tool, but
Selector tool, as shown in
147