Chapter 2 'Installation and Startup' — Installing the Device (Steps)
Installing the Device (Steps)
10RU and 6RU Devices
1RU Device
28
Depending on the type of device, follow the steps below to install the
device and perform its initial configuration.
1.
Install the blade center at its definitive place.
If you need to move the blade center, it must be empty.
2.
On the front panel, install the blades in the blade center: the blades
and the bays in the blade center are numbered (stickers). Insert
blade #1 in bay #1, blade #2 in bay #2, etc.
3.
Install the power supply units.
Mount the device in a rack.
ViBE VS7000
User Manual