THOMSON ViBE VS7000 User Manual page 133

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
ViBE VS7000
User Manual
Adaptation for Anevia's external
transport stream that can be read and processed by Anevia's
ViaMotion devices. Do not use this feature if your TS is not sent to this
kind of device.
TS Multiplexer Output
The TS Multiplexer
Figure 3-107. TS multiplexer parameters
For this item, you must set the following parameters:
TS rate: set the TS rate in bits per second.
TS ID
PAT period: enter the period of the PAT, in milliseconds.
PMT period: enter the period of all the PMT, in milliseconds.
Standard: set the standard that the output TS should respect (DVB,
MPEG-2 or ATSC).
In the Input tab, additional parameters are available:
Input type: choose between:
Program: defines a program and a component of this program.
In this case, set the following parameters:
- PMT PID
- PCR PID: the Auto value is suitable in 99% of cases. Specify
the PID if you asked to create an independent PCR PID in the
TS audio video packetizer
(see Section 'TS Audio Video Packetizer Item'
page 132).
Component: defines a component of a program that has already
been defined.
For example: define a program input for the video component
and a component input for the associated audio component.
Program number: program number of the component.
Component PID
packager: set to true to generate a
item multiplexes transport packets in an MPEG-2 TS.
item, in the PCR generation field
on
133