THOMSON ViBE VS7000 User Manual page 120

Chapter 3 'Web Browser Interface' — Workflow Library Content Parameters
120
Figure 3-93. Clipping parameters
For this item, you must set the following parameters:
Cropped area X and Y: location of the upper left corner of the area to
crop, in pixels.
Insertion area X
cropped area should be inserted in the output video, in pixels.
Cropped area size: size of the area to crop, in pixels.
Background color: enter the values of the red, green and blue
components.
Output size: enter the size that the video should have after clipping, in
pixels.
Deinterlace
The Deinterlace item detects if the video is interlaced and deinterlaces if
necessary.
For this item, there are no particular parameters to set.
DVB Subtitle Inserter
The DVB Subtitle Inserter
contained in a TS input program and insert them in the associated video.
Subtitles are thus inserted before the video is encoded.
Connect this item, as shown in
On input 1: the Video decoder's output.
On input 2: the output of the TS component extractor configured to
extract the PID that contains the DVB subtitles.
and Y: location of the upper left corner where the
item lets you extract the DVB subtitles
Figure 3-94, with:
ViBE VS7000
User Manual