Stormshield SN900 Installation Instructions Manual page 40

Initial installation wizard
From your client workstation, type the following address in your browser:
Enter the "admin" password.
If you have connected your client workstation on port 1, you will no longer be able to access
the installation wizard. You will need to connect your computer to port
and reboot your Firewall.
An installation wizard will guide you through the configuration of your Firewall.
The default password of the "admin" user (super administrator) must be changed the very
first time the product is used. The wizard will prompt the user to change his password during
the initial installation, in the Administration of the appliance window. In the web
administration interface, this password can be changed in the Administrator module (System
menu), under the Admin account tab.
The definition of this password must observe the best practices described in the User Guide,
in the chapter Welcome, under the section User awareness, sub-section User password
management, available at:
Thanks to this wizard, you can:
-
Configure the network in order to define the network architecture in which your product is located,
-
Configure your security policy,
-
Register your product in order to obtain upgrades,
-
Perform the first upgrades,
-
Download and install your license. For more information on this subject, please refer to
UPDATING THE
The registration step allows you to obtain the password to access your Secure area. Once the installation is
complete, you can log on to the configuration graphical interface at the following address:
https://10.0.0.254/admin
Stormshield Network administration suite
The Stormshield Network Administration Suite, which groups the GLOBAL ADMINISTRATION,
REALTIME MONITOR and EVENT REPORTER softwares, can be downloaded from your Secure area.
Log on to the following address to access or obtain the access codes to your Secure area:
https://mystormshield.eu/
You can also obtain this suite at:
Page 40 /59
IMPORTANT
NOTE
http://documentation.stormshield.eu
LICENSE.
http://gui.stormshield.eu/last-version
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
INITIAL CONNECTION TO THE PRODUCT
https://10.0.0.254/install
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015
2
(or on another port),
APPENDIX A: