Presentation Of "Sn" Models; Sn150 Model - Stormshield SN900 Installation Instructions Manual

PRESENTATION OF "SN" MODELS

Stormshield Network SN range models rely on the most advanced technologies to provide high performance
and optimum protection.

SN150 model

The SN150 multi-function Firewall is fanless and comes with an external power adapter.
Front panel: LEDs
This model has its LEDs on the front panel as shown below:
1
OUT interface
2
IN interface
Rear panel: connectors
The connectors on the SN150 model are located in the rear panel.
1. The USB port allows accessing the appliance in console mode*; it is possible to log on to the
2. The USB port 2.0 can be used for secure configuration or updates. You can also plug a USB
The SN150 model offers five 1GbE ports:
3. The first zone is defined by default in INTERNAL 2 (IN) mode. It is made up of 4 switched
ports.
4. The second zone is the EXTERNAL 1 (OUT) interface, in external mode by default. It makes up
the zone that is needed for connecting to the internet.
5. This is the button for resetting the appliance to its factory settings (defaultconfig).
6. Plugging in the mains adapter starts automatically this product.
* This connection in console mode requires the installation of a driver. Depending on your operating system, you can
download a driver from:
Page 18 /59
1 2
Firewall directly using a computer. The default baud rate on this model is 115200 baud
(8N1).
key or an approved USB modem into it.
http://www.ftdichip.com/Drivers/VCP.htm
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
1 2
3 4
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015
PRESENTATION OF "SN" MODELS
1. Online LED (green)
2. Status LED (green)
3. Power LED (yellow)
1 2 3
5 6