Connection
Plug your SN Firewall into a mains socket, then connect the network ports as follows:
-
INTERNAL interface
-
EXTERNAL interface
The client workstation can either be linked directly to
the Firewall's internal interface or connected to the
local network, which is itself connected to the
Firewall's internal interface. For a direct connection of
the workstation to the Firewall, use the crossover
Ethernet cable provided with the product.
In factory settings, the network port
case, you cannot access the configuration interface from this port.
Page 36 /59
2
(IN): client workstation
1
(OUT): Internet access device
SN150 model
SN910 model
IMPORTANT
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
INITIAL CONNECTION TO THE PRODUCT
SN200, SN300, SN500, SN700 and SN900 models
SN2000, SN3000 and SN6000 models
1
is reserved for the modem or Internet router. In this
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015