Installation - Stormshield SN900 Installation Instructions Manual

Do not place objects on your Stormshield Network appliance.
Stormshield Network appliances comply with the requirements set out in the European
standard EN55022, Class A or B. In a residential environment, a Class A product may cause
radioelectric interference, for which the user may need to take appropriate measures.

Installation

All Stormshield Network appliances can be installed in 19-inch cabinets. SN500, SN700, SN900 and SN910
appliances are sold with an installation kit containing brackets. SN2000, SN3000 and SN6000 appliances are
sold with a set of rails. A fastening system for placing the appliance in a rack, in the form of a rack mount shelf,
can be included by special order for SN150, SN200 and SN300 models. Two SN150, SN200 or SN300
Firewalls can be installed on the same shelf.
Ensure that the cabinet complies with temperature and humidity conditions indicated in the
section
The SN150 model can also be installed vertically (screws and fasteners not provided).
Installing SN500, SN700 and SN900 models in a 19" cabinet
The minimum vertical space needed for installing an SN Firewall is 1U.
Proceed as follows:
Screw the brackets to the sides of the Firewall.
Once the brackets have been installed, you can fasten the Firewall to the vertical rails located at the front
of your cabinet using screws and the caged nuts (not provided with the appliance).
Page 31 /59
IMPORTANT
IMPORTANT
REMINDER
Conditions of use.
NOTE
PRESENTATION AND INSTALLATION GUIDE – SN RANGE
INSTALLATION PRECAUTIONS
snengde_installation-product-SN-range v1.2 - Copyright Netasq 2015