Engine Treatment & Maintenance Products; Fuel Characteristics; Paint - FNM HPE 300 Owner's Manual

Marine Diesel Engines
ATTENTION!
For the engine maintenance products read and follow the instructions indicated by producers or turn to
FNM service. Some products and use are linked to the operating temperatures.
Engine oil
Engine oil additive
Fuel additive (long storage)
Fuel winter storage
Fuel Additive
Metal protector/unlocker
Grease for gears
Turbo greasing
Turbo greasing
Long storage engine
oil/washing/cylinders antirust
Use only DIN EN 590 diesel fuel.
Winter diesel fuel: For winter use, (if used at temperatures lower than 0°C), common diesel fuel may
cause problems because it may become too dense and thick because of paraffin freezing. For this
reason, during the winter we suggest that you use winter diesel fuel or antifreeze additives for diesel fuel.
In fact, you may use this type of fuel without any problems up to temperatures between –15° C and –22°
C. In countries with a different climate, it is usually possible to find types of diesel fuel with different
thermal properties.
For engine maintenance (avoid to spray the turbocharger) and touch up of small rusted parts, use acrylic
polyurethane-based paint RAL 9006.
-
For rusted engine parts:
- Remove the rust with abrasive paper or similar until the surface is perfectly clean.
- Clean the surface accurately.
- Spray the paint (follow the producer instructions).
ATTENTION! Paint is commonly toxic and flammable, take care during use. Aerate the room and
read the producer's instructions.
ENG rel. 1/11
O
WNER
Engine treatment and maintenance products

Fuel characteristics

www.fnm-marine.com
'
M
S ANUAL
FNM advises BARDAHL oil and products
BARDAHL XTC SAE 5W40 Synthetic
BARDAHL 2 OIL TREATMENT
BARDAHL DAB or IOSSO Anti batterico gasolio
BARDAHL DIESEL ANTIFREEZE
BARDAHL DIESEL INJECTOR CLEANER
BARDAHL SPRAY K9
BARDAHL Viscogrease
ZEP 2000 grease spray
Red lithium grease
Storage 30 oil MIL-L-2104B

Paint

General Information
HPE 300
26