Engine Technical Data; Product Identification; Documentation Attached - FNM HPE Series Installation Manual

2 Engine technical data

2.1 Product identification

HPE series marine engines are divided into classes depending
on the family and application to which they are intended:
Model (or Engine Type)
HPE 40S/80/80SD/110
HPE 110JD/135JD
HPE/P 40/150/170/190/205
HPE 150JD/170JD/190JD/205JD
HPE/P 100/225/250/250H
HPE 225JD/250JD
HPE/P 300
HPE 300JD
HPEL 45/80
HPEL 65/90
2.1.1 ID label
The ID label is applied on the engine and on the control unit
(or ECU Box), in the position indicated in the table below (see
also paragraph 3.3 - Engine elements on page 8):
Engine Label position on the engine
1.3HPE
On the engine crankcase.
1.9HPE
2.4HPE On top of the engine, attached to the intercooler housing.
On the cooled exhaust manifold on the right side of the
3.0HPE
The data that are found on the identification label are given
below as an example:
Engine Type: HPE110
Engine Family: 13T4L550
Serial No.: 47110XX Year: 2011
Rpm: 4400 kW: 80.88 HP:110
Engine Type
-
Engine Family according to RCD (CE).
-
Engine Serial No.
-
Year of manufacture
-
Test speed (Rpm)
-
Power in kW (kW)
-
Horsepower (HP)
-
Family Application
1.3HPE Yachting
1.9HPE Yachting
2.4HPE Yachting
3.0HPE Yachting
1.3HPE Work
1.9HPE Work
engine.
Costruzioni Motori Diesel SpA
Z.I. Valle di Vitalba
85020 Atella (PZ) Italy
2.1.2 Engine serial No.
The engine serial number is also printed on the engine block.
The location is shown in the table below (see also paragraph
1.6 - Main components of the engine FNM HPE Series ® - on
page 16):
Engine Engine serial number position
1.3HPE On the right side of the crankcase, bell housing connection,
1.9HPE or on the front side of the crankcase, above the bell
2.4HPE
3.0HPE On the crankcase, front side, above the bell housing.
The serial number of the engine is constituted as follows:
Position 1 2
Serial
4 7
number
Positions 1-2: Identification code of the model.
Last two figures of the engine year of
Positions 3-4:
production
Positions 5-7: Progressive
Besides the engine also the transmission, transom and stern
drive have their own serial number, indicated on each of them
by the respective manufacturers.
Communicate to CMD the serial number of each element of
the propulsion system whenever you require any maintenance.
2.1.3 EPA/IMO Label
The engine can be provided with a label which indicates the
presence of EPA certification and/or IMO MARPOL Annex IV
pre-certification.
The label is usually affixed near the identification label and
reports the EPA/IMO family number. If the engine is equipped
with IMO MARPOL Annex IV (NOx), pre-certification, the
information regarding the pre-certification is contained in the
certificate attached to the engine.

2.2 Documentation attached

The HPE marine diesel engines are accompanied by the
following documentation:
Use and Maintenance manual
-
Installation Manual (this document)
-
Installation Form
-
FNM® Series HPE – Installation Manual – 3
housing.
3 4 5 6
1 1 0 X
7
X