Main Engine Components; Documentation And Info Plates - FNM HPE 300 Owner's Manual

Marine Diesel Engines
Intercooler :
Reduces the temperature of compressed air from the
compressor of the turbogroup that flows to the engine intake
duct using a bundle of finned tubes crossed by sea water.
Oil sump:
Contains engine lubrication oil
Oil exchanger:
Reduces the temperature of the engine lubrication oil.
Air filter:
Retains the impurities in the air intake.
Turbocharger:
Compresses the intake air exploiting the energy of exhaust
gases through the use of a turbine-compressor group.
Raiser:
Reduces the temperature of the exhaust gases coming out of
the turbine, conveys fumes towards the exhaust and prevents
the return of sea water into the turbine
Water to water exchanger:
Reduces the temperature of engine coolant through heat
exchange with sea water.
Main thermostat housing:
Contains the thermostatic valve of the cooling circuit.
Sea water pump:
Sucks water from the sea water intake and pushes it in the
cooling circuit.
Oil filler cap:
Useful in filling the engine oil.
The engine is shipped with this technical documentation:

Owner's Manual

Installation Manual

Transmission producer installation manual

Installation form
HPE 300 engines are certified for CE directive 94/25/EC as amended by directive 2003/44/EC for exhaust
emissions (SYSTEMS WITH AND WITHOUT INTEGRATED EXHAUST):
- Standard reference EN ISO 8178-1 Reciprocating internal combustion engines, EXHAUST EMISSION MEASUREMENT.
HPE 300 engines are certified for noise emissions:
-
Standard reference ISO 14509 Small Craft Measurement of airborne SOUND EMITTED by powered recreational craft.
IMPORTANT!
At moment of delivery you can find on the engine some yellow plates indicating important information, take
care to read the info.
In addition the engine has warning labels whose the meaning is indicated below. Note: labels bearing the
exclamation mark highlight a potential danger.
Lifting point (of the motor only)
ENG rel. 1/11
'
O
WNER S

Main engine components

.

Documentation and info plates

Certificates
www.fnm-marine.com
M
ANUAL
Expansion tank:
Contains the engine coolant.
Zinc anode (3):
Prevents the galvanic oxidation of metal parts.
Fuel exchanger (single):
Reduces the diesel fuel temperature in the return line to the
heat exchanger.
Double exchanger (power steering oil-diesel fuel):
Reduces the temperature of steering oil and diesel fuel.
Fuel filter (mounted in the engine compartment)
Filters diesel fuel in inlet to the supply line of the engine
Starter:
Starts the engine.
Low-pressure electric fuel pump
Sucks fuel from the low pressure line and sends it to the high
pressure line.
Secondary thermostat housing:
Contains the thermostatic valve of the auxiliary cooling
circuit.
Alternator:
Generates electric power, the output voltage is 12 Volt.
Lifting eyes
Risk of burns, ejection of hot water
under pressure.
General Information
HPE 300
13