4
Remove the user interface controller card (UICC) access cover.
Control panel assembly removal
Note: To prevent damage, lock the flatbed scanner module while performing this repair.
1
Remove the front control panel cover. See
2
Remove the left side control panel cover. See
3
Remove the right side control panel cover. See
4
Remove the one screw (A) from the bottom of the scanner.
5
Remove the two screws (B) from the left side of the scanner and the two screws (C) from the right side of the
scanner.
"Front control panel cover removal" on page
"Left side control panel cover removal" on page
"Right side control panel cover removal" on page
Repair information
72
4036
66.
67.
69.