Power On Reset (Por) Sequence; Administrative Menus - Lexmark 6500E Service Manual

Power On Reset (POR) sequence

The POR sequence must be followed in order for the printer and scanner to properly power up and establish
communications with each other and the network. Follow one of the two POR sequences:
Printer and scanner
1
With both the printer and scanner previously turned off, turn on the printer.
2
Press and hold button pattern for desired service menu, or no buttons for user mode.
3
Turn on the scanner within 20 seconds of turning on the printer.
4
Release the buttons when the splash screen appears.
Scanner only
Note: The scanner only POR applies only to a printer/scanner that was already powered up prior to the POR. (This is
useful for a service technician who needs to power in and out of service menus).
1
Turn off the scanner.
2
Press and hold button pattern for desired service menu, or no buttons for the user mode.
3
Turn on the scanner within 20 seconds of turning off the scanner.
4
Release the buttons when the splash screen appears.

Administrative menus

See the menu map for a brief overview of the menus available from the control panel.
Select a menu or menu item for more details.
Supplies Menu
Replace Supplies
‑ Separator Pad
‑ Pick Roller
Paper Menu
Default Source
Paper Size/Type
Configure MP
Envelope Enhance
Paper Texture
Custom Scan Sizes
Substitute Size
Paper Weight
Paper Loading
Custom Types
Custom Names
Universal Setup
Service menus
Reports
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Shortcut list
Fax Job Log
Fax Call Log
Copy Shortcuts
E-Mail Shortcuts
Fax Shortcuts
FTP Shortcuts
Profiles List
Print Fonts
Print Directory
Print Demo
Asset Report
40
4036
Network/Ports
Active NIC
Standard Network
Standard USB
SMTP Setup