Reports; Event Log; Display Log; Print Log - Lexmark 6500E Service Manual

REPORTS

From this menu you can print the Menu Settings Page or the Event Log.

EVENT LOG

Display Log

Display Log shows the message that appeared on the control panel for each event in the log, starting with the most
recent. Use the touch-screen arrows to scroll through the log entries. To see more in-depth information about each
event, print the event log using the Print Log menu item.
Touch Back to return to the EVENT LOG menu.

Print Log

The Print Log menu item prints a detailed report of each event in the log. The first page of the event log contains a
Printer Information section similar to what is printed on a Menu Setting Page. Printed at the top of each page is the
model name and serial number to assist in tracking each page of a report to a specific printer. The printout of the log
contains the following information for each error in the log:
•
Page count when the error occurred (except for 900 service controller board software errors).
•
Code versions of all packages when error occurred.
• Panel message when error occurred (except for 900 service controller board software errors).
•
Debug information and secondary error codes, depending on the error.
The Clear Log operation clears out the errors that print in this report. The errors listed in the Display Log operation do
not necessarily match in number or in order with the errors from the printer log.
Note: This log can be printed from configuration menu, but the debug and secondary error codes are not printed on
this log.

Clear Log

This menu item deletes the event log. Once the event log is deleted, the only item remaining on the log is the "Clear
Log" event.
Touch Back to return to the EVENT LOG menu.

SCANNER TESTS

Scanner Calibration Reset

This option resets the scanner calibration values to factory default settings. This should be done after you replace the
flatbed scanner unit.
Note: Be sure the scanner glass and backing material are clean before performing this test.
ASIC Test
This test initiates a scan of the scanner ASIC memory. This is a pass/fail test.
Service menus
53
4036