4036-307, -308
Control panel assembly removal
1.
Remove the document cover assembly. See
2.
Place the scanner on its back.
Note: Make sure the glass pane is placed on a soft, clean surface to avoid scratching the glass.
3.
Remove the four screws (A) to loosen the control panel assembly from the scanner.
4.
Place the scanner right side up, rock the control panel up, and slide forward.
Note: If you are going to reinstall the control panel assembly, protect the touch screen from damage by
placing it on a clean, soft surface.
4-24
Service Manual
"Document cover assembly removal" on page
A
4-14.