Feed Roller Motor Removal - Lexmark 6500E Service Manual

Feed roller motor removal

Note: To prevent damage, lock the flatbed scanner module while performing this repair.
1
Remove the ADF top cover. See
2
Remove the front control panel cover. See
3
Remove the left side control panel cover. See
4
Remove the right side control panel cover. See
5
Remove the control panel assembly. See
6
Remove the complete flatbed document cover. See
7
Remove the ADF front and rear entry guides. See
8
Remove the flatbed cover. See
9
Remove the complete ADF scanner assembly. See
10
Slip the belt (B) from its place on the feed roller motor pulley, and then remove the two screws (C).
"ADF top cover removal" on page
"Front control panel cover removal" on page
"Left side control panel cover removal" on page
"Right side control panel cover removal" on page
"Control panel assembly removal" on page
"Complete flatbed document cover removal" on page
"ADF front and rear entry guides removal" on page
"Flatbed cover removal" on page
"Complete ADF scanner assembly removal" on page
Repair information
135
85.
66.
72.
100.
4036
67.
69.
81.
99.
122.