Advertisement
13. Press the 1/8" F27 piece into place on the bottom front center of the fuselage as shown in the image below, but do NOT glue it yet.
Make sure it is facing the right direction. Press the 3/32" F30 parts into place on the bottom front as shown in the image below, but
do NOT glue it yet.
14. Press the 1/8" F24 piece into place on the fuselage front top as shown in the image below, but do NOT glue it yet.
15. Press the 1/8" F25 piece into place on the fuselage rear top as shown in the image below, but do NOT glue it yet.
16. Be gentle with the stringers in the next step, as they can break if you are not careful with them. If they don't seem to fit, please
check to make sure they are oriented correctly, and if they are still tight, lightly sand the mating surfaces until they fit nicely. Press
the 1/8" F26 piece into place on the fuselage rear bottom center as shown in the image below, but do NOT glue it yet. Press the two
(2) 3/32" F29 pieces into place on the fuselage rear bottom, between F7 and F11 as shown below, but do NOT glue them yet. Press
the two (2) 3/32" F321 pieces into place on the fuselage rear bottom, between formers F11 and F14 as shown in the image below,
but do NOT glue them yet.
Copyright 2005-2011 Mountain Models
7
Advertisement
