Canon Elura 60 Instruction Manual page 68

UsiIl9 . .
the.MuJti-.lmageSc:reen
You can operate the multi-image screen only in the following playback modes:
- When [S.SPEED] is set to [MANUAL]: Playback pause, slow forward/reverse playback
~
- When [S.sPEED] is set to [FAST}, [MOD.] or [SLOW]: Playback pause
~
In
C~MERA
mode, set the program selector to
~.
1. Press the DIGITAL EFFECTS button.
[D. EFFECT
~],
[FADER], [EFFECT] and [MULTI-5] appear.
DIGITAL EFFECTS
~
-
DIGITAL EFFECTS
~
"MULTI-S" flashes.
2. Select [MULTI-51.
[S.SPEED] and [S.SPLlT] appears.
3. Select [S.SPEED].
[MANUAL]. [FAST], [MOD.] and [SLOW] appear.
4. Select the transition speed.
Following transition speeds can be selected: fast (every 4 frames), moderate (every 6
frames*), slow (every 8 frames*).
* In Low light mode: moderate (every 8 frames), slow (every 12 frames)
5. Select [MULTI-S] again.
[S.sPEED] and [S.sPLlT] appears.
6. Select [S.SPUT].
[4], [9], [16] settings appear.
7. Select the number of sequences.
8. Press the DIGITAL EFFECTS button.
9. Press the ON/OFF button.
• MANUAL: Images will be captured each time you press the
ON/OFF button The blue frame indicating the next sequence
disappears after the last image. To cancel the last captured
Image, press and hold the ON/OFF button. To cancel the
multi-image screen, press and release the ON/OFF button.
• FAST, MODERATE, SLOW: The set number of images will be captured at the set
speed. To cancel the multi-image screen, press the ON/OFF button.
10. Press the start/stop button to begin recording.
The multi-Image screen is recorded on the tape
67