Download Print this page

Advertisement

II
C)
Be sure to install the Digital Video Software before connecting the
camcorder to the computer.
o
Users of Windows 2000 or Windows XP must first log in as an
Administrator to 'Install programs.
12
Windows XP Users:
Your digital video camcorder is equipped with the standard Picture
Transfer Protocol (PTP). This protocol enables you to download images by
s'lmply connecting the camcorder to a computer with the USB cable (the
software such as the [Scanner and Camera Wizard] starts automatically).
However, please note that there are several limitations to downloading
images with this method. To avoid these problems, install ZoomBrowser
EX to download images.
o
It may take a few minutes, after connecting the camcorder, until you
can download images.
o
Images protected on the camcorder may lose th'IS setting once they are
downloaded to the computer.
1.
Check a camcorder is not connected to the computer.
While a camcorder is connected to the computer, the software cannot be
installed normally. If a camcorder is connected, detach the USB cable from
the computer.
2.
Close any programs that are running.
3.
Set the DIGITAL VIDEO SOLUTION DISK For Windows in the
computerls CD-ROM drive.
• The installer panel opens automatically.
• If the installer panel does not appear automatically, use the following
procedures to display it.
Windows 98/Windows Me/Windows 2000:
1. Double-click the [My Computer] icon.
2. Right-click the CD-ROM icon and select [Open] from the displayed
menu.
3. Double-click the [Setup.exe] icon.
Windows XP:
1. Select [My Computer] from the [Start] menu.
2. Right-click the CD-ROM icon and select [Open] from the displayed
menu.
3. Double-click the [Setup.exe] icon.
Depending on the setting of your computer, the file extension
11
.exe" may
not appear.

Advertisement

Chapters

   Also See for Canon Elura 60

   Related Manuals for Canon Elura 60

This manual also for:

Elura 65, Elura 70

Comments to this Manuals

Symbols: 0
Latest comments: